您的位置: 首页 » 法律资料网 » 法律法规 »

广州市人民政府规章草案办理程序有关问题的规定

时间:2024-07-24 02:24:16 来源: 法律资料网 作者:法律资料网 阅读:8954
下载地址: 点击此处下载

广州市人民政府规章草案办理程序有关问题的规定

广东省广州市人民政府办公厅


广州市人民政府办公厅文件

穗府办〔2001〕18号

印发《广州市人民政府规章草案办理程序有关问题的规定》的通知


各区、县级市人民政府,市府直属各单位:

  经市人民政府同意,现将《广州市人民政府规章草案办理程序有关问题的规定》印发给你们,请依照执行。

广州市人民政府办公厅
二○○一年八月二十八日


广州市人民政府规章草案办理程序有关问题的规定


  为规范本市政府规章草案的办理程序,提高立法质量,根据《立法法》,结合本市的实际情况,现就本市政府规章草案办理程序的有关问题作如下规定:

  一、上报规章草案的程序。

  (一)市政府工作部门上报规章草案,应当按照市政府确定的当年年度立法计划执行。

  因本市经济发展和社会事务管理实际,急需制定规章但年度立法计划又未列入的项目,应当经市长、分管副市长批准后,方可上报。

  (二)市政府工作部门上报的规章草案,应当经本部门的法制机构审核,并经过该部门办公会议讨论通过后,以该部门正式文件上报市政府。上报文件应当包括规章草案文本及其注释稿(注释稿的有关要求见已下发的穗府法〔2001〕19号文件)、起草说明、起草依据(包括上位法及有关参考文件)。经过初步协调的,还应当附送协调情况说明及相关资料。

  上报的规章草案应当在标题下方统一注明“(代拟稿)”。

  二、规章草案统一由市政府法制办公室审核。市政府法制办公室收到由市政府办公厅转来的规章草案后,应当按规定组织论证、协调和修改。每次修改后的草案应当在标题下方注明“(修改稿第×稿)”。第“×”稿的编号按1、2、3……的顺序编排。


  三、规章草案提交市政府常务会议讨论的程序。

  (一)经市政府法制办公室承办处室审核的规章草案,由法制办公室领导审定后,在标题下方统一注明“(送审稿)”,连同注释稿、起草说明、起草依据等有关材料送市政府办公厅,由市政府办公厅报市政府主要领导决定是否提交市政府常务会议讨论。

  (二)“送审稿”文本及其注释稿、起草说明、起草依据等有关材料,由草拟部门负责按要求印制。印制时,不应改动经修改定稿的“送审稿”。确需改动的,须经市政府法制办公室同意。

  (三)经市政府领导批示同意提交市政府常务会议讨论的规章草案,由市政府法制办公室将“送审稿”文本及其注释稿、起草说明、起草依据、审核意见等有关材料按规定份数和时间要求送市政府办公厅,由市政府办公厅安排列入市政府常务会议议程,并在会前将“送审稿”文本及有关材料分送市政府各位领导和有关单位。 (四)市政府常务会议讨论规章草案时,统一由市政府法制办公室就制定该项规章的必要性、可行性和协调修改情况,以及需要市政府常务会议决定的主要问题提出审核意见。专业性、技术性较强的,也可由草拟部门领导作主要说明,市政府法制办公室提出意见和建议。

  四、规章“送审稿”经市政府常务会议讨论通过的,由市政府办公厅按程序呈市长签署政府令发布。经市政府常务会议讨论原则通过的,由市政府法制办公室根据常务会议提出的意见组织修改,经市政府法制办公室主任审定后,送市政府办公厅。市政府办公厅按程序呈市政府分管领导审核后,报市长签署政府令,予以公布。 经市长签署政府令公布的规章,由市政府办公厅印发。规章文本印出后,由市政府法制办公室负责分别报国务院、省人大常委会、省政府和市人大常委会备案。规章文本由市政府办公厅负责交《广州日报》和《广州政报》刊登。

  五、规章的修订和废止,依照本规定执行。

  六、市政府拟作为议案提交市人大或其常委会审议的地方性法规草案的办理程序适用本规定。

  七、经市政府常务会议讨论通过的地方性法规草案,市政府办公厅按程序呈市政府分管领导审核后,由市长签署议案。市政府办公厅印发议案并报送市人大或其常委会。 报送市人大或其常委会的地方性法规草案,应当在标题下方统一注明“(草案)”。“草案”文本、注释稿、起草说明及有关材料由草拟部门负责按要求印制。



国家能源局关于印发水电工程勘察设计管理办法和水电工程设计变更管理办法的通知

国家能源局


国家能源局关于印发水电工程勘察设计管理办法和水电工程设计变更管理办法的通知

国能新能[2011]361号


各省、自治区、直辖市发展改革委、能源局,国家电网公司、南方电网公司、中国国电集团公司、中国华电集团公司、中国华能集团公司、中国大唐集团公司、中国电力投资集团公司、国家开发投资公司、中国长江三峡集团公司、中国水利水电建设集团公司、葛洲坝集团公司,水电水利规划设计总院:

为加强水电工程勘察设计管理,规范勘察设计和设计变更行为,保证设计质量和工程安全,根据水电工程建设管理实际,我局组织制定了《水电工程勘察设计管理办法》和《水电工程设计变更管理办法》。现印发你们,请遵照执行。

附件:一、水电工程勘察设计管理办法

二、水电工程设计变更管理办法

二O一一年十一月三日

附件一:

水电工程勘察设计管理办法

第一章 总则

第一条 为加强水电工程勘察设计管理,保证勘察设计质量和工程安全,根据《中华人民共和国可再生能源法》、《建设工程勘察设计管理条例》和《建设工程质量管理条例》等法律法规,制定本办法。

第二条 本办法适用于在主要河流上建设的水电工程项目、总装机容量25万千瓦及以上的水电工程项目和抽水蓄能电站项目(以下简称水电工程)。其他水电工程参照执行。

第三条 本办法所称水电工程勘察设计是指根据水电工程建设要求,查明、分析和评价工程场地地质条件,分析论证技术、经济、资源和环境相关情况,确定工程设计方案,编制勘察设计文件的活动。

第四条 水电工程建设应坚持“先勘察、后设计、再施工”的原则。

水电工程勘察设计应与社会经济发展水平相适应,做到安全可靠、技术先进、经济合理、资源节约和环境友好,实现水电开发的经济效益、社会效益和环境效益相统一。

第五条 水电工程勘察设计阶段分为河流水电规划(或抽水蓄能电站选点规划)、预可行性研究、可行性研究、招标设计及施工详图设计等五个阶段。勘察设计单位应分阶段开展工作,提出符合相应阶段规程规范要求的勘察设计文件。

第六条 勘察设计单位应依法进行工程勘察设计,严格执行工程建设强制性标准,确保勘察设计文件的完整性、真实性和准确性,并对勘察设计的成果质量负责。

第七条 国家能源局负责水电工程勘察设计活动的监督管理。

各级地方能源主管部门按规定权限负责和参与本行政区域水电工程勘察设计活动的监督管理。

第八条 发挥设计咨询的作用,鼓励在大型水电工程勘察设计工作中开展工程设计咨询,提高设计水平,优化设计方案,保证设计质量。

第二章 资质与合同

第九条 从事水电工程勘察设计活动的单位应具有国家规定的相应资质。勘察设计单位应在其资质等级许可的范围内承揽工程勘察设计业务。

禁止勘察设计单位超越其资质等级许可的范围或者以其他勘察设计单位的名义承揽工程勘察设计业务。禁止勘察设计单位允许其他单位或者个人以本单位的名义承揽勘察设计业务。

第十条 勘察设计单位从事大型水电工程勘察设计应具有工程勘察和工程设计甲级资质(水力发电);承担坝高200米及以上水电工程和地震基本烈度Ⅷ度及以上高坝水电工程的勘察设计单位应具有大(1)型水电工程勘察设计业绩。

第十一条 水电工程勘察设计依法实行招标发包或直接发包。发包工作一般应在河流水电规划或抽水蓄能电站选点规划批准后进行。

第十二条 建设单位不得将工程勘察设计业务发包给不具有相应资质和业绩的勘察设计单位。勘察设计单位不得将所承揽的勘察设计业务转包或违法分包。

第十三条 建设单位应依法与勘察设计单位签订勘察设计合同,对勘察设计工作范围、内容、深度、进度、质量及服务进行约定,保证合理的勘察设计周期,执行国家有关勘察设计收费标准。

建设单位不得强迫或暗示勘察设计单位违反工程建设强制性标准,降低工程质量。

第十四条 两个及以上单位承担同一工程勘察设计的,合同中应明确主体勘察设计单位。主体勘察设计单位负责总体策划、组织协调和设计集成。其他勘察设计单位负责向主体勘察设计单位提供资料和成果,并对其成果质量负责。

第三章 技术要求

第十五条 勘察设计单位应做好勘察设计工作策划,确定勘察设计的重点以及相关技术路线,编制勘察设计科研工作大纲,合理配置与勘察设计任务相适应的资源和专业技术人员。

第十六条 勘察设计单位应收集并分析勘察设计工作所需的地形地质、水文气象、生态环境、移民安置、经济社会发展等基础资料,所采用资料应真实、有效。

第十七条 工程地质勘察应涵盖枢纽工程建设区、水库淹没影响区和移民安置区。勘察设计单位应重视对断层、滑坡体、堆积体、泥石流、岩溶、崩塌等不良地质现象的调查分析,保证选址的合理性和建筑物地基的安全性。

第十八条 勘察设计单位应根据工程需要,组织开展重大技术问题研究和科技攻关工作,科学论证工程设计方案,确保工程安全可靠。

第十九条 勘察设计单位应会同地方政府按阶段要求开展移民安置规划设计工作。移民安置规划设计应以资源环境承载力为基础,与当地国民经济和社会发展规划以及土地利用总体规划、城市总体规划、村庄和集镇规划等相适应,听取移民和安置区居民以及建设单位的意见。

可行性研究阶段,移民安置规划设计文件应达到枢纽工程同等设计深度。

第二十条 勘察设计单位应依据批复的项目环境影响评价报告、水土保持方案报告和安全预评价报告,开展环境保护措施设计、水土保持措施设计和劳动安全与工业卫生设计。

第二十一条 勘察设计单位应以审定的可行性研究报告为依据开展招标设计,复核、深化和细化设计方案,满足招标文件编制的要求。

第二十二条 勘察设计单位负责编制施工详图阶段设计文件,满足工程施工要求。施工图设计文件应对涉及工程质量和施工安全的重点部位注明有关安全质量方面的提示信息,对防范工程安全质量风险提出指导意见。

第二十三条 勘察设计单位应建立健全技术质量管理体系,落实技术质量责任制,对勘察设计产品进行分级管理,按规定履行勘察设计文件校审制度,并做好勘察设计文件的归档工作。

第四章 技术审查

第二十四条 国家对水电工程勘察设计文件实行技术审查制度,委托行业技术管理单位对勘察设计文件进行技术审查。技术审查包括河流水电规划报告(或抽水蓄能电站选点规划报告)审查、预可行性研究报告审查、可行性研究报告以及有关专题报告审查。

第二十五条 技术审查内容主要包括:检查勘察设计工作是否执行国家法律法规和工程建设强制性标准;评价勘察设计范围、内容和深度是否满足规程规范的要求;审议勘察设计采用基础资料是否全面准确、重大技术问题是否论证充分、结论是否正确;审定工程主要特征参数及工程设计方案和移民安置方案;协调工程综合利用等有关问题。

第二十六条 审查单位应坚持技术决策的独立性、公正性和科学性,组织有关单位和专家开展技术审查工作,听取有关部门、地方政府以及建设单位的意见,形成技术审查意见,并对审查结论负责。

技术审查工作完成后,审查单位应及时将审查意见上报国家能源局,并印送建设单位和有关单位。

第二十七条 经审查的勘察设计文件是后续勘察设计工作的基础。

可行性研究报告及其审查意见是项目核准和建设的技术依据。

第五章 现场服务

第二十八条 工程施工阶段,勘察设计单位应设立现场设计代表机构,及时派驻相应的技术人员,制定相关工作制度,提供现场技术服务,满足工程建设要求。

第二十九条 现场设计代表应做好技术交底;跟踪现场施工情况,研究并及时解决工程建设有关技术问题;参与隐蔽工程和关键部位的检查验收;配合工程质量检查、质量监督、安全鉴定和工程验收等工作。

第三十条 现场设计代表应按照有关要求,开展地质编录和工程地质条件预测预报;根据开挖揭露的地质条件和工程其他实际情况,加强工程重大技术问题解决方案的复核,及时完善设计方案和施工技术要求。

第三十一条 现场设计代表发现不按设计文件要求施工、野蛮施工、弄虚作假或偷工减料等情况,应及时以书面形式向建设单位反映。必要时,应报告质量监督机构和国家能源局。

第六章 设计变更

第三十二条 招标设计和施工详图设计阶段,对审定的工程特征参数、工程设计方案和移民安置方案进行的调整、补充和优化均属设计变更。

第三十三条 工程设计变更分为一般设计变更和重大设计变更。一般设计变更由设计单位负责编制设计变更文件。重大设计变更由建设单位组织设计单位编制专题报告,报原审查单位审查。

水电工程设计变更管理办法另行制定。

第七章 设计回访

第三十四条 勘察设计单位应定期开展枢纽工程设计回访,检查评价枢纽建筑物和主要设施设备的安全性、适用性。根据工程实际需要,开展必要的设计复核,总结勘察设计经验,并为工程安全运行提供技术支持。

第三十五条 枢纽工程设计回访分为全面设计回访和专项设计回访。全面设计回访至少每10年一次。首次全面设计回访,应在工程投入运行后的5年之内进行。专项设计回访视需要进行。

建设单位或运行管理单位应为设计回访提供必要的工作条件。勘察设计单位应向建设单位或运行单位提交设计回访报告。

第八章 附 则

第三十六条 本办法由国家能源局负责解释,自发布之日起施行。




附件二:

水电工程设计变更管理办法



第一条 为加强水电工程设计和建设管理,规范设计变更行为,保证工程安全和质量,依据《建设工程勘察设计管理条例》和《水电工程勘察设计管理办法》,制定本办法。

第二条 本办法适用于在主要河流上建设的水电工程项目、总装机容量25万千瓦及以上的水电工程项目和抽水蓄能电站项目(以下简称水电工程)。其他水电工程参照执行。

第三条 设计变更是指在招标设计阶段和施工详图阶段,对审定的工程主要特征参数、工程设计方案和移民安置方案等所进行的改变,包括调整、补充和优化。

第四条 设计变更应坚持科学求实的原则,符合国家有关法律法规和工程建设强制性标准的规定,做到先论证、后审查(或审核)、再实施。

第五条 设计变更分为一般设计变更和重大设计变更。重大设计变更是指涉及工程安全、质量、功能、规模、概算,以及对环境、社会有重大影响的设计变更。除此之外的其他设计变更为一般设计变更。

水电工程重大设计变更的界定见附件。水电工程概算调整管理办法另行制定。

第七条 设计单位应结合工程建设实际,复核工程设计方案和主要参数,及时提出必要的设计变更文件。建设单位、监理单位和施工单位可以提出变更设计的建议,设计单位应考虑施工水平和管理水平的影响,对变更设计的建议进行技术、经济论证。确需变更的,由设计单位编制设计变更文件。

第八条 重大设计变更文件应达到或超过可行性研究阶段的深度要求。内容主要包括:

(一)工程概况;

(二)重大设计变更的缘由和必要性、变更的项目和内容、与设计变更相关的基础资料及试验数据;

(三)设计变更与原勘察设计文件的对比分析;

(四)变更设计方案及原设计方案在工程量、工程进度、造价或费用等方面的对照清单和相应的单项设计概算文件;

(五)必要时,还应包含设计变更方案的施工图设计及其施工技术要求。

第九条 工程建设过程中,因抢险救援或应急处置导致的设计变更,应由参建各方代表签字确认。属于重大设计变更的,建设单位应及时组织设计单位编制设计变更文件,并按规定程序报审。

第十条 审查单位在收到建设单位重大设计变更审查申请后,负责组织开展审查工作,提出审查意见,报送国家能源局。

第十一条 经审定的重大设计变更一般不得再次变更。确需再次变更的,建设单位须组织设计单位先进行必要性论证,报原审查(或审核)单位同意后,再行编制设计变更文件,履行相关程序。

第十二条严禁借设计变更变相扩大工程建设规模、增加建设内容,提高建设标准;严禁借设计变更,降低安全质量标准,损害和削弱工程应有的功能和作用;严禁肢解设计变更内容,规避审查。

第十三条 本办法由国家能源局负责解释,自发布之日起施行。



附:水电工程重大设计变更范围目录

水电工程重大设计变更范围目录

(一)设计条件和安全标准

1、工程开发方式、开发任务及工程规模的变化;

2、水库特征水位、水库调度运行方式重大改变;

3、工程等别及主要建筑物设计安全标准的变化。

(二)工程布置及主要建筑物

1、坝、厂址及其主要建筑物场址的变化;

2、主要建筑物的布置或结构方案的改变;

3、增加或取消重要的单体水工建筑物;

4、主要筑坝材料料源方案的改变;

5、施工导流方式或导流建筑物方案的变化;

6、工程总进度及主要控制进度的变化。

(三)机电及金属结构设备

1、电站接入系统方式和电气主接线方案的变化;

2、机组型式、单机容量和重要技术参数的变化;

3、高压配电装置和高压引出线设计方案的变化;

4、电站控制运行方式及继电保护方案的重大变化;

5、金属结构设备布置方案及设备型式的重大变化。

(四)环境保护和水土保持

1、环境保护和水土保持工程措施的重大变化;

2、环境保护和水土保持工程项目的增加或取消。

(五)移民安置

1、征地范围调整及重要实物指标的较大变化;

2、移民安置方案与移民安置进度的重大变化;

3、城(集)镇迁建和专项处理方案重大变化。

进出口商品报验的规定(附英文)

国家商检局


进出口商品报验的规定(附英文)

1989年9月1日,国家商检局

前言
为了加强进出口商品报验管理工作,根据《中华人民共和国进出口商品检验法》的有关条款,特制定本规定。

第一条 报验单位
一、有进出口经营权的国内企业;
二、进口商品收货人或其代理人;
三、出口商品生产企业;
四、对外贸易关系人;
五、中外合资、中外合作和外商独资企业;
六、国外企业、商社常驻中国代表机构等。

第二条 报验范围
一、《种类表》内的进出口商品;
二、出口食品卫生检验和检疫,以及出口动物产品的检疫;
三、出口危险品包装容器的性能鉴定和使用鉴定;
四、装运出口易腐烂变质食品的船舱,集装箱等;
五、其它法律或者行政法规规定必须经商检机构检验的进出口商品;
六、我国与进口国主管部门协定必须凭我国商检机构证书方准进口的商品;
七、对外贸易合同、信用证规定由商检机构检验出证的商品;
八、对外贸易关系人申请的鉴定业务;
九、委托检验业务。
有下列情况之一者,商检机构一般不予受理报验:
一、应施检验的出口商品,未经检验已装运出口的;
二、按分工规定,不属商检工作范围的。

第三条 报验时必须提供的单证
一、进口商品报验时,报验人应提供外贸合同、国外发票、提单、装箱单和进口货物到货通知单等有关单证;
申请进口商品品质检验的还应提供国外品质证书,使用说明及有关标准和技术资料,凭样成交的,须加附成交样品;
申请残损鉴定的还应提供理货残损单、铁路商务记录、空运事故记录或海事报告等证明货损情况的有关单证;
申请重(数)量鉴定的还应提供重量明细单,理货清单等;
进口商品经收、用货部门验收或其他单位检验的,应加附有关验收记录,重量明细单或检验结果报告单等;
二、出口商品报验时,报验人应提供外贸合同(确认书),信用证以及有关单证函电等。凭样成交的应提供买卖双方确认的样品。申请预验的商品,应提供必要的检验依据。
经本地区预验的商品需在本地区换证出口时,应加附由该局签发的预验结果单;

经其他商检机构检验的商品,必须加附发运地商检机构签发的“出口商品检验换证凭单”正本。
凡必须向商检机构办理卫生注册及出口质量许可证的商品,必须交附商检机构签发的卫生注册证书、厂检合格单或出口质量许可证。 冷冻、水产、畜产品和罐头食品等须办理卫生证时,必须交附商检机构签发的卫生注册证书及厂检合格单。
三、申请鉴定业务的报验
对外贸易关系人申请的鉴定业务,根据鉴定工作需要应附交有关合同、国外发票、提单(运单)、商务记录、重量明细单,拟装货物清单、舱单、配载图、船方函电或书面说明,海事报告或其它有关证明。
四、申请危险品包装检验的报验
(一)申请危险品包装性能鉴定时,申请人须提供有关产品标准和工艺规程等有关资料;
(二)申请危险品包装使用鉴定时,申请人须提供包装性能鉴定报告及有关单证。
五、申请委托检验的报验
(一)申请人应提交检验样品、列明检验要求,必要时提供有关检验标准或检验方法;
(二)国外委托人委托检验和鉴定业务时,应提供有关函电或资料。

第四条 报验时限和地点
必须经商检机构检验的进口商品到货后,由收货单位或代理接运单位凭《进口货物到货通知单》或其它有关单证向到货口岸或到达站商检机构办理进口商品登记;
《种类表》内的进口商品以及须商检机构检验出证对外索赔的《种类表》外的进口商品,收用货部门或代理人均应在索赔有效期前不少于三分之一的时间内向货物目的地商检机构报验,如索赔期已近,来不及完成检验出证者,报验人须预先向国外办理延长索赔手续;
进口商品的残损检验应在口岸报验;
大宗散装进口商品鉴重一般应在口岸报验;
一批到货分拨数地的进口商品,收货部门或代理人应报请口岸商检机构检验出证,因故不能在口岸进行整批检验的,应申请办理易地检验手续。
出口商品最迟应于报关或装运出口前十天报验,对个别检验周期较长的商品,应留有相应扦样、检验等方面的时间。

第五条 报验要求
一、报验人必须按规定认真填写要求报验的检验申请单,每份申请单只限填报一批商品,做到书写工整,字迹清楚,不得随意涂改,项目填写齐全,译文准确,中英文内容一致,加盖报验单位公章;
二、报验人对所需检验证书的内容如有特殊要求的应预先在检验申请单上申明;

三、申请报验时应按规定缴纳检验费;
四、报验人应预先约定抽样检验、鉴定的时间提供进行抽样和检验鉴定等必要的工作条件;
五、已报验的出口商品,如国外开来信用证修改函时,凡涉及与商检有关的条款,报验单位须及时将修改函送商检机构,办理更改手续;
六、报验人如因特殊原因需撤销报验时,经书面申明原因后,可办理撤销;
七、报验人领取证书时应如实签署姓名和领证时间。对证书应妥善保管,不得丢失。各类证书应各按其特定的范围使用,不得混用。

第六条 证单的更改
一、商检机构签发的各种证单,报验人有正当理由需要更改或者增减内容时,必须向原签证的商检机构申请,并随附原签发的全部证单,经审核同意后,由原商检机构予以更改或者换发有关证单;
二、内地商检机构签发的证书,如发现问题,属于检验项目内容的更改和补充,应由报验人与原签证商检机构联系处理;
三、报验人须严格遵守商检法和有关行政法规的规定,对商检证单不得擅自涂改、伪造、变造和非法转让。

第七条 出运限期
经商检机构检验合格发给检验证书或者放行单的出口商品,一般应在证单签发之日起两个月内装运出口,鲜活类出口商品应当在两周内装运出口。超过上述期限的应向商检机构重新报验,并交回原签发的所有检验证书和放行单。

第八条
第八条 本规定由国家商检局负责解释。

第九条
第九条 本规定自公布之日起实施。

PROVISIONS ON THE APPLICATION FOR INSPECTION OF IMPORT AND EXPORTCOMMODITIES

(Promulgated by the State Administration of Import and Export Com-modity Inspection on August 21, 1989)

Whole Doc.
With a view to strengthening the administrative work of application
for inspection of import and export commodities, these provisions are
formulated in accordance with the relevant articles of the Law of the
People's Republic of China on Import and Export Commodity Inspection.

Article 1 Application Units
(1) Domestic enterprises authorized to engage in import and export
business;
(2) Receivers (consignee) of import commodities or their agents;
(3) Manufacturers producing export commodities;
(4) Parties involved in foreign trade;
(5) Chinese-foreign equity joint ventures, Chinese-foreign
contractual joint ventures and wholly foreign-owned enterprises;
(6) Representative offices of foreign enterprises and trade
corporations in China.

Article 2 Scope of Application for Inspection
(1) Import and export commodities included in the List of
Commodities;
(2) Sanitary inspection and quarantine of export food and quarantine
of export animal products;
(3) Performance testing and usage testing of packagings (pressure
vessels or containers) for dangerous export goods;
(4) Vessels and containers used for carrying export perishable food;
(5) Import and export commodities subject to inspection by the
commodity inspe ction authorities under other laws or administrative rules
and regulations;
(6) Commodities which can be permitted for import must be subject to
the certificates issued by the commodity inspection authorities in
accordance with the agreement between the competent departments of China
and those of the importing countries;
(7) Commodities subject to inspection and certification by the
commodity inspection authorities as specified in the foreign trade
contracts or letter of credits;
(8) Superintending and surveying services upon application by the
parties involved in foreign trade;
(9) Inspection services upon entrustment.
The commodity inspection authorities will not accept the application
for inspection, if there is any one of the following conditions:
(1) Export commodities subject to inspection have been shipped out
without inspection;
(2) Commodities do not belong to the scope of commodity inspection in
accordance with the division of work.

Article 3 Documents / Certificates Required for Application for Inspection
(1) The applicants when applying for inspection of import
commodities, shall submit the foreign trade contracts, foreign invoices,
bill of lading, packing list and the Notice for Arrival of Imported Goods;
Those applying for quality inspection of import commodities shall
submit the quality certificates of foreign countries, instruments of usage
relative standards and technical materials. If the contract is concluded
based on samples, the transaction samples must be attached accordingly;
Those who applying for survey on damage goods shall submit the
relative documents/certificates, such as tallying sheet of damage goods,
the railway commercial records, the air accident records or the marine
reports;
Those who applying for weight (quantity) survey shall submit the
description of weight and tallying sheet, etc.;
Import commodities subject to inspection and receipt by the receivers
and end-users, or subject to inspection by other units, are required to be
attached with the inspection and receipt records, weight description and
report of inspection findings.
(2) The applicants when applying for inspection of export commodities
shall submit foreign trade contracts, (confirmation letters), L/C and
relative documents/certificates and letters. If the contract is concluded
based on samples, the samples confirmed by two parties are required to be
attached. Those who apply for preliminary inspection of export commodities
shall submit the necessary inspection basis.
If the commodities subject to preliminary inspection are to be
exported against the inspection certificates issued by the local commodity
inspection authorities the preliminary inspection results shall be
attached.
Commodities subject to inspection by the other commodity inspection
authorities must be attached with the original copy of "List of Exchanging
Inspection Certificates of Export Commodities".
Any commodities which must make sanitary registration and export
quality license with the commodity inspection authorities shall be
attached with the sanitary registration certificates issued by the
commodity inspection authorities, the qualified inspection report issued
by the factory or the export quality license.
If frozen, aquatic, animal products and canned food are required to
go through formalities for sanitary registration certificates, the
sanitary registration certificates issued by the commodity inspection
authorities and the qualified inspection report issued by the factory must
be presented to the commodity inspection authorities.
(3) Application for inspection of superintending and surveying
services The pa rties involved in foreign trade when applying for
superintending and surveying services shall submit the relevant contracts,
foreign invoices, bill of lading (transport bill of lading), commercial
records, weight descriptions, cargo manifests, storage plan, letters by
shippers or writing instruments, marine reports or other relative
certificates.
(4) Application for inspection of packaging inspection of dangerous
goods
((1)) The applicants when applying for testing on performance of
packagings of dangerous goods must submit the relevant documents such as
standards for products and processing specifications, etc.;
((2)) The applicants when applying for testing on usage of packagings
of dangerous goods must submit the performance testing report and the
relative documents and certificates.
(5) Application for inspection of entrustment inspection
((1)) The applicants shall submit the samples for inspection and
state the inspection requirements, and if necessary shall submit the
relevant standard for inspection or inspection methods;
((2)) Foreign parties when applying for entrustment inspection and
surveying services shall submit the relevant letters and materials.

Article 4 Time-limit and Place of Application for Inspection
After arrival of the import commodities which are subject to
inspection by the commodity inspection authorities, the receivers or the
forwarding agents shall make registration for import commodities with the
commodity inspection authorities located at the arrival port or the
station of arrival against the "Notice of Arrival of Imported Goods" or
other relative documents/certificates;
For import commodities which are included in the List of Commodities
and for import commodities which are not included in the List of
Commodities, but subject to inspection certificates issued by the
commodity inspection authorities, against which claim may be claimed, the
receivers and end-users or their agents shall apply for inspection to the
commodity inspection authorities located at the destination of goods
within the time-limit at least before 1/3 valid period for claim. If the
valid period for claim is limited to accomplish the inspection procedures
for issuing certificates the applicants must make an application for
extension of the claim period with the foreign parties in advance;
Application for inspection of damage survey on damaged import
commodities are in general made at the arrival port;
Application for inspection of weight survey on large quantity of
import commodities in bulk are in general made at the arrival port;
For a batch of import commodities which will be distributed to
several places, the receivers or their agents shall apply to the commodity
inspection authorities located at the port for inspection and issuance of
certificates. Those which can not be inspected at the port by batches due
to some certain reasons shall apply for inspection at another place.
For export commodities, application for inspection shall be made at
least 10 days before declaration to the Customs or before shipment. For
some special export commodities which need longer time for inspection,
appropriate time shall be kept for sampling and inspection.

Article 5 Requirements of Application for Inspection
(1) The applicants must fill in the application in accordance with
the requirements. Being of clear writing, accurate, complete in filled
items, and identical Chinese and English version, and with stamps of the
application units, one copy of the application is only to refer to one
batch on commodities. No change or alternation of the contents of the
application can be made;
(2) If the applicants, have some special requirements about the
contents of the inspection certificate, they shall make a statement on the
application of inspection in advance;
(3) The applicants when applying for inspection shall pay the
inspection fee in accordance with the provisions;
(4) The applicants shall arrange the time for sampling inspection
procedures, and testing and provide the necessary working conditions for
sampling, inspection and testing.
(5) For export commodities which have completed the application
procedures for inspection, if the L/C is required to be revised by foreign
letters, which refers to some commodity inspection clauses, the applicants
must present the revised letter to the commodity inspection authorities
and go through the formalities for modifying the clauses related.
(6) The applicants when withdrawing the application for inspection
due to some special reasons, shall proceed with the cancellation of
application for inspection by making a written statement.
(7) The applicants, what taking the inspection certificates shall
sign their accurate names and time, and keep the certificate in a proper
way. The various kinds of certificates shall be used in accordance with
their special requirements and will not be mixed up for use.

Article 6 Modification of Certificates and Documents
(1) The applicants when deemed necessary, have reasonable reasons to
require t o modify or add/remit the contents of the various kinds
certificates and documents issued by the commodity inspection authorities,
they must make an application to the original commodity inspection
authority which issued the certificates and present all the certificates
and documents originally issued. Subject to examination and approval, the
relevant certificates documents may be modified or reissued by the
original commodity inspection authority.
(2) If the inspection certificates issued by the inland commodity
inspection authorities are found some problems which refer to the
modification and the contents of inspection items, the applicants shall
contact with the original commodity inspection authority which issued the
inspection certificate to deal with the relative matters.
(3) The applicants must strictly abide by the Law of the People's
Republic of China on Import and Export Commodity Inspection and the
relevant administrative laws, rules and regulations, no commodity
inspection certificates can be allowed purposely to be altered, falsified,
remade and illegally assigned.

Article 7 The Time-limit for Shipment
The export commodities subject to inspection by the commodity
inspection authorities which have been issued the inspection certificate
or releasing notices shall be in general shipped out within 2 months since
the date of issuing the certificates or documents, while the fresh and
live commodities shall be shipped out within two weeks. If the export
commodities are not shipped out within the above- mentioned time-limit,
the application for reinspection must be made with the commodity
inspection authorities, and all inspection certificates and releasing
notices issued originally must be returned respectively.

Article 8
The right of interpreting these Provisions resides in the State
Administration of Import and Export Commodity Inspection.

Article 9
These Provisions shall go into effect on the date of their
promulgation.